Lake Wales Cabinet Refacing
Cabinet Refacing in Lake Wales, FL
Cabinet refacing in Lake Wales, FL. New doors, drawer fronts, and box veneer over solid cabinets. Free estimates, no gut-remodel upsell.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Lake Wales and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Cabinet Refacing
Cabinet Refacing vs replacement for Lake Wales homes
Is it time to update dated cabinets without tearing your kitchen down to the studs? New doors, drawer fronts, and box veneer go over your existing cabinet carcass. The structure underneath stays put. Older rural homes across Lake Wales and Polk County often have boxes that are still solid wood, even when the finish looks rough, so refacing is the right call more often than a full teardown.
Lake Wales Cabinet Refacing handles this work for homeowners who want a fresh kitchen without a fresh mortgage. The Lakeland-Winter Haven metro's heat and humidity are hard on laminate and thermofoil finishes over the years. That's usually what fails first, not the box itself. We check both before quoting anything.
What we do
Cabinet Refacing services
Cabinet Refacing across Lake Wales and the surrounding area.
Residential Services
Cabinet Refacing
Cabinet Refacing in Lake Wales, FL: new doors, box veneer, and hardware over your existing cabinets. Free estimates.
Learn more →
Kitchen Cabinet Refacing
Kitchen Cabinet Refacing in Lake Wales, FL: new doors, box veneer, and finish updates for your whole kitchen. Free estimates.
Learn more →
Bathroom Vanity Refacing
Bathroom Vanity Refacing in Lake Wales, FL with moisture-resistant finishes built for humid bathrooms. New doors, sealed edges. Free estimates.
Learn more →
Cabinet Door Replacement
Cabinet Door Replacement in Lake Wales, FL for solid boxes with dated or damaged doors. Precise fitting, matched finishes. Free estimates available.
Learn more →
Cabinet Refinishing & Painting
Cabinet Refinishing & Painting in Lake Wales, FL with cabinet-grade enamel and sealed topcoats built to resist humidity. Free estimates available.
Learn more →
Custom Cabinet Doors
Custom cabinet doors in Lake Wales built to fit nonstandard openings, with style and finish options. Free estimates on every order.
Learn more →
Kitchen Island Refacing
Kitchen Island Refacing in Lake Wales, FL to match your island's exposed sides to new kitchen cabinetry. Panel veneer, smooth finish. Free estimates.
Learn more →
Thermofoil & Laminate Peeling Repair
Thermofoil & Laminate Peeling Repair in Lake Wales, FL for bubbling or lifting cabinet finishes caused by Florida heat and humidity. Free estimates.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Lake Wales Cabinet Refacing
Refacing is the whole job, not a sales pitch
Lake Wales Cabinet Refacing doesn't bait you into a full gut remodel. If boxes are solid, refacing stays the plan.
Materials picked for Polk County humidity
Door and veneer choices account for the heat and moisture that wear down weak finishes near sinks and dishwashers.
Boxes checked before anything is quoted
We inspect box condition in person first, so your estimate reflects what's actually behind the old doors.
Shorter downtime than a full remodel
Cabinet boxes stay in place during refacing, which keeps your kitchen usable for more of the project.
Have a project in mind?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Initial Consultation
A specialist checks your Lake Wales cabinet boxes and talks through your style goals.
Step 2Measurement & Design
We measure cabinet openings precisely to plan door sizes, finishes, and layout adjustments.
Step 3Material Selection
Homeowners pick veneers and finishes built to handle Central Florida's summer humidity.
Step 4Surface Preparation
Boxes are cleaned, sanded, and repaired, common with older rural Lake Wales kitchens.
Step 5Refacing Installation
New veneers, doors, and panels are fitted tight against the existing cabinet frames.
Step 6Final Walkthrough
We confirm alignment, finish quality, and working hardware before calling the job done.
Ready to start?
Get a Free EstimateCost
Kitchen cabinet refacing cost in Lake Wales, FL
Pricing comes down to three things: how many boxes need new faces, what door material you pick, and whether you add soft-close hardware or molding. These ranges are ballparks, not a locked quote. Call (863) 270-3669 or request a free estimate for a number based on your actual kitchen.
| Project type | Typical range | What’s included |
|---|---|---|
| Door-only swap | $1,800–$4,500 | new doors and drawer fronts on boxes that don't need veneer. |
| Full box refacing | $5,000–$12,000 | box veneer plus new doors, drawers, and hardware across the kitchen. |
| Add-ons | $300–$2,000 | soft-close hinges, crown molding, or drawer organizers layered onto either tier. |
| Bathroom vanity refacing | $900–$3,000 | single or double vanity with moisture-resistant materials. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials that hold up in Florida humidity
Polk County summers run hot and wet, long enough each year to strain weak adhesives and finishes. We lean on materials that have a track record here, not just on paper.
Wood Veneer Sheets
Thin veneers refresh older Lake Wales cabinet boxes without replacing the solid wood frames underneath.
Laminate Finishes
Laminate holds up well against Polk County's summer humidity and years of daily kitchen use.
Solid Wood Doors
New solid wood fronts replace doors worn down by years of Central Florida heat exposure.
Cabinet Hardware
Knobs, pulls, and hinges get chosen to match the updated cabinet style and finish.
Soft-Close Hinges
Upgraded hinges quiet down cabinet doors in busy kitchens across Lake Wales homes.
Protective Topcoat
A sealant layer guards new finishes against the moisture that wears down older, unsealed cabinets here.
Questions on materials?
Get a Free EstimateTimeline
How long does cabinet refacing take?
Most of the wait is on materials, not labor. Here's how a typical project unfolds.
- 01
Consult and measure
same day - 02
Door order and fabrication
1–2 weeks - 03
Box prep and veneer
1 day - 04
Door and hardware install
1–2 days - 05
Final walkthrough
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, codes, and compliance for cabinet refacing
Most refacing jobs skip the permit office entirely. A few related changes don't. Always confirm specifics with your local building department before scheduling.
| Typically needs a permit | Often no permit |
|---|---|
| Electrical relocation for under-cabinet lighting | Door and drawer front replacement |
| Plumbing relocation for a sink or island move | Cabinet box veneer application |
| Structural wall changes during a larger remodel | Hardware and soft-close upgrades |
| — | Cabinet painting or refinishing |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a cabinet refacing pro
| DIY | Hire a pro |
|---|---|
| Swapping a single door or drawer front | Veneering box faces so seams and grain line up across the kitchen |
| Tightening or replacing basic hinges | Matching finish color exactly across new doors and existing trim |
| Changing out knobs and pulls | Boring hinge cups for soft-close hardware without chipping the surface |
| — | Aligning reveals across a full run of cabinets so nothing looks uneven |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call before cabinet damage spreads
A few signs mean it's worth a call sooner rather than later. Call (863) 270-3669 or request a free estimate before a small peel spreads into a bigger repair.
- Thermofoil or laminate lifting at corners or edges
- Swelling near a sink, dishwasher, or water line
- Doors that no longer close flush against the box
- Boxes still solid, but the finish looks dated or damaged
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Lake Wales and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Outside these locations?
Before & after
See the work up close
Before 
After
Customer feedback
What local customers say
Kevin H.
1 week ago
5 out of 5 starsCalled Lake Wales Cabinet Refacing after a neighbor tip in Lake Wales. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our cabinet door and drawer front replacement.
Lake Wales, FL
Andrew E.
3 weeks ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for cabinet refacing. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Hillcrest Heights, FL
Donna S.
3 days ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the budget-tier refacing packages for older homes turned out better than I pictured.
Babson Park, FL
Common questions
Cabinet Refacing FAQs
What is the most expensive part of redoing a kitchen?
Custom cabinetry and full cabinet replacement run the highest cost in most kitchen jobs. That's exactly why refacing exists: it keeps your existing boxes and swaps only the doors, drawer fronts, and exposed surfaces, which cuts the biggest expense out of the project.
Do you need a permit to remodel a kitchen in Florida?
It depends on scope. Structural changes, plumbing relocation, or new electrical circuits usually need a permit through your local building department. Cabinet refacing on its own typically doesn't, since nothing structural changes. Check with Polk County or your city if you're unsure.
Is it worth it to reface kitchen cabinets?
If your boxes are square and solid, yes. Refacing costs less than full replacement, takes less time, and gives you a new look without tearing the kitchen apart. If boxes are warped or water-damaged, replacement may make more sense.
What are the current kitchen design trends in Florida?
Shaker-style doors, warm wood tones, and matte or satin finishes are popular right now. Soft-close hardware and simplified hardware pulls are common upgrades homeowners add during refacing.
How much does cabinet refacing cost in Lake Wales?
Most jobs land between $3,500 and $14,000 depending on cabinet count, door material, and add-ons like soft-close hinges or crown molding. A free in-home estimate gets you a number specific to your kitchen.
How long does cabinet refacing take?
A typical kitchen takes about 1 to 2 weeks total, most of that waiting on custom doors to arrive. On-site work, prep through final install, usually runs 2 to 4 days.
Do I need a permit for cabinet refacing?
Usually not. Door swaps, box veneer, and hardware upgrades don't touch plumbing or electrical, so most refacing jobs skip the permit process entirely. If you're also moving under-cabinet lighting or a sink, that part may need one.
Is DIY cabinet refacing a good idea?
Swapping a single door or tightening a hinge is fine to DIY. Veneering an entire kitchen's worth of boxes and getting every door reveal even is harder than it looks. Misaligned veneer is expensive to fix after the fact.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Lake Wales.